TOKENONLINE Global Worldwide Service
SMD EMI Filters Common Mode Choke - TCPWC Series

SMD EMI Filters Common Mode Choke - TCPWC Series

Environmental Characteristics
  • Electrical Performance Test
Test Items Specifications Test Conditions / Test Methods
Impedance Refer to standard
electrical characteristic spec.
LCR Meter HP 4291B
DC Resistance (RDC) Micro-Ohm meter (GOM-801G)
Withstand Voltage
(VDC)
Component should not be damaged Test Voltage: 2.5 Times Rated Voltage
Testing Time: 60 sec.
Charge Current: 0.5mA
Rated Voltage
(VDC)
Test Voltage: Rated Voltage
Testing Time: 1 to 5 sec.
Charge Current: 1mA
Insulation Resistance
(I.R.)
Charge Current: 1 minute
10M ohm min
  • Mechanical Performance Test
Test Items Specifications Test Conditions / Test Methods
Component Adhesion
(push Test)
Base: 0805 ≥ 2 Lbs
Cover: 0805 ≥ 1 Lbs
Base: 1206 ≥ 4 Lbs
Cover: 1206 ≥ 2 Lbs
The component should be soldered (232°C±5°C for 10 sec.) totinned copper substrate. Applied force gauge to the side of component It must withstand force of 2 or 4 pounds without failure of the component.
Drop Test Component should not be damaged Dropping chip by each side and corner.
Drop 10 times in total
Drop height:100cm
Drop weight:125g
Solderability Test The terminal should at least be 90% covered with solder The component shall be dipped in a melted solder bath
at 235°C±5°C for 5 seconds.
Vibration Test
(Low Frequency)
Component should not be damaged 1. Amplitude: 1.5 m/m
2. Frequency: 10-55-10 Hz(1min)
3. Direction: X, Y, Z
4. Duration: 2 Hrs/X, Y, Z
  • Climatic Test
Test Items Specifications Test Conditions / Test Methods
Low Temperature Storage Test Impedance change:
Within±20%
Without distinct damage in ppearance.
1. Temp: -40°C±C2°C
2. Time: 1000±48 Hours
3. Component should be tested after 1 hour at room temperature.
Thermal Shock Test
Total: 5 Cycles
High Temperature Storage Test 1. Temp: 85°C±2°C
2. Time: 1000±48 Hours
3. Component should be tested after 1 hour at room temperature.
Humidity Test 1. Temp: 40°C±2°C
2. R.H.: 90%~95%
3. Time: 48±2 Hours
High Temperature Load Life Test There should be no evidence of short or open circuit 1. Temp: 85°C±2°C
2. Time: 96±12 Hours
3. Load: Allowed DC Current
Low Temperature Load Life Test 1. Temp: -40°C±2°C
2. Time: 96±12 Hours
3. Load: Allowed DC Current
  • Storage Temperature: 25?°C; Humidity:< 80%RH

How to Order
TCPWCH05MTR900
123456
1 SMD EMI Filters Common Mode Choke
2 Shielding Type
CodeShielding Type
HShielding
3 Dimensions (L×W) (mm)
CodeDimensions (L×W) (mm)EIA
052.10×1.200805
063.20×1.601206
4 Impedance Tolerance
CodeImpedance Tolerance
M±20%
5 Package
CodePackage
TRTaping Reel
PBulk
6 Impedance
CodeImpedance
90090Ω
121120Ω
1021000Ω
2222200Ω

Page: 1 / 2