Products Ceramic Resonator

Ceramic Resonator

Download Entire Ceramic Resonator Catalogue PDF file (257KB).

Token offers a full line which meet the performance requirements of today's industrial applications. Ours consumer grade products are rated from -20°C to +80°C, and industrial standards offer stable performance with an operating temperature range. The temperature variation and aging characteristics of the automotive grade serve the market well, providing reliable start up and stable oscillation in microprocessor circuits across a wide variety of applications.

It should be noted that automotive and industrial application circuits, especially in critical applications, should be evaluated and characterized by Token for stability. Please contact our piezo engineering group for IC characterization at the beginning of your design process. There is no charge for engineering evaluation and we highly recommend all companies to pursue the characterization process which will eliminate potential design issues and liability with regard to stability. Token offers two extending frequency range in MHz and KHz.

MHz Type Ceramic Resonator

Ceramic Resonators - ZTA Series

ZTA (MHz) Ceramic Resonator series cover the frequency range of 1.79 MHz to 60.00 MHz with an initial frequency tolerance 0.5%.
Type: DIP. Frequency Range: 1.79MHz ~ 60.00MHz. Murata(P/N): CSA.

ZTA Series - PDF (90KB)

Ceramic Resonators with Built-in Capacitor - ZTT Series

ZTT Ceramic Resonator series features a built-in load capacitance. This feature eliminates any need for external loading capacitors and reduces component count, increases reliability and reduces size.
Type: DIP. Frequency Range: 1.79MHz ~ 60.00MHz. Murata(P/N): CST.

ZTT Series - PDF (137KB)

Chip Ceramic Resonators - ZTAC / ZTTC Series

ZTTC Chip Ceramic Resonator series Type MG/MT/MX features a built-in load capacitance. This feature eliminates any need for external loading capacitors and reduces component count, increases reliability and reduces size. ZTAC series functions same as the ZTA series with two terminals without capacitor.
Type: CHIP. Frequency Range: 1.79MHz ~ 50.00MHz. Murata(P/N): CSAC/CSTC.

ZTAC / ZTTC Series - PDF (113KB)

KHz Type Ceramic Resonator

Ceramic Resonators - ZTB Series

ZTB (KHz) Series is designed to provide the design engineer with a rugged, relatively low frequency device in the frequency range of 190 KHz to 1,250 KHz.
Type: DIP. Frequency Range: 190KHz ~ 1250KHz. Murata(P/N): CSB.

ZTB Series - PDF (309KB)

Ceramic Resonators - ZTBY Series

ZTBY Series is a surface mountable device unit of ZTB with the frequency range of 375 KHz to 1,250 KHz.
Type: SMD. Frequency Range: 375KHz ~ 1250KHz. Murata(P/N): CSBF.

ZTBY Series - PDF (308KB)

Ceramic Resonators - ZTB 456F Series

ZTB 456F Multiplexers Series is designed to provide frequency modulation for HI-FI stereo application.
Type: DIP. Frequency Range: 456KHz. Murata(P/N): CSB456F.

ZTB 456F Series - PDF (250KB)

Ceramic Resonators - ZTB 500/503F Series

ZTB 456F Multiplexers Series is designed to provide frequency modulation for HI-FI stereo application.
Type: DIP. Frequency Range: 500/503KHz. Murata(P/N): CSB503F.

ZTB 500/503F Series - PDF (250KB)

Ceramic Resonators - ZTB 912F Series

ZTB 912F for HI-FI Automobile Stereo is designed to provide frequency modulation for HI-FI stereo application.
Type: DIP. Frequency Range: 912KHz. Murata(P/N): CSB912F.

ZTB 912F Series - PDF (250KB)

Piezo Electric Devices Precaution Usage

The piezo by itself is not a clock, so it must be used with circuitry built into the IC to create the clock signal. The clock circuit consists of the passive resonator, quartz or ceramic piezo, and an active amplifier that is built into the IC. Please refer to this page for Piezo Electric Devices Precaution Usage.

Piezo Electric Devices Precaution Usage PDF (220KB)

Redial Taping Dimensions

Redial Taping Dimensions of Ceramic Filters, Resonators, Discriminators, and Trap Filters.

Redial Taping Dimensions PDF (298KB)