Zero Ohm and Jumper Wire Resistors - ZO, JW Series
Zero Ohm and Jumper Wire Resistors - ZO, JW Series
ZO and JW Series are developed for the interconnection device Between
points on a P.C. Board as jumper wires or Crossovers. Token offer
a quick solution to the following problems, (1) Inability to connect
two points on a P.C. Board due To other circuit paths which must be
crossed over. (2) An After the fact design the requires new point
connections. (3) Circuit tuning by changing point connections. Zero
ohms are especially suited for automatic machine insertion.
|
 |
| Type |
Rating |
Dimension (mm) |
| L Max. |
D Max. |
H ± 3 |
d+0.02-0.04 |
| ZO - 1/8 |
0.125W |
4.2 |
2.0 |
28 |
0.5 |
| ZO- 1/4 |
0.25W |
6.8 |
2.5 |
28 |
0.5 |
 |
| Type |
L±1 |
d+0.02 -0.04 |
H |
P |
| ZW-A |
61.5 |
0.5 |
3 - 10 |
5 - 30 |
| ZW-B |
61.5 |
0.6 |
3 - 10 |
5 - 30 |
| Requirements |
Characteristics |
| Maximum Resistance |
0.05Ω |
| Lead Material |
tin-plead copper |
| Body Material |
Electrical grade, high performance molding compound |
| Dielectric Withstanding Voltage |
Atomspheric-500V RMS, Reduced-325V RMS |
| Insulation Flammability |
Resistor Insulation is self extinguishing within 10
seconds after externally applied flame is removed. |
| Current Rating |
25 AMPS at 25°C, dreading to 0 AMPS at 150°C |
- 1 Part Number : ZO-1/4 , ZO-1/8 , ZW-A , ZW-B
- 2 Rated Power : 0.125W , 0.25W
- 3 Package
| Code | Package |
| TB | Taping Box |
| P | Bulk |
|
