TOKENONLINE Global Worldwide Service
Photo Resistors

Photo Resistors

Terminology
  1. Light Resistance: Measured at 10 lux with standard light A (2854K-color temperature) and 2hr. preillumination at 400-600 lux prior testing.
  2. Dark Resistance: Measured at 10th seconds after closing 10 lux.
  3. Gamma characteristic:
    Under 10 lux and 100 lux and given by
    γ = log(R10/R100) / log(100/10) = log(R10/R100)
    R10, R100: resistance at 10 lux and 100 lux. The tolerance of  γ is ±0.1.
  4. Pmax: Max. power dissipation at ambient temperature of 25°C.At higher ambient temperature,the maximum power permissible may be lowered.
  5. Vmax: Max. voltage in darkness that may be applied to the device continuously.
  6. Spectral peak: Spectral sensitivity of photoresistors depends on the wavelength of light they are exposed to and in accordance with fig 2. The tolerance of spectral peak is ±50nm.

Spectral Response
cds,photo,photoresistors

Physical and Environmental Characteristics
ITEM CONDITIONS PERFORMANCE
Solderability Put the terminals into welding tank at temp. 230±5°C for 2±0.5s (terminal roots are 5mm away from the tin surface). wetting>95%
Temperature Changing Change of temperature in accordance with: TA: -40°C TB: +60°C Number of cycles: 5  Exposure duration: 30min Drift of R10 = ± 20%
No visible damage
Constant humidity and heat 1. Put the device in test box at Temperature: 60±5°C
Humidity: 90-95% Illumination: 0lux Duration: 100h
2. Take the device and measure after24h at normal temperature and humidity.
Drift of R10= ± 30%
No visible damage
Constant load Temperature At 25±5°C
Illumination: 150lux at rated power
Duration: 600h
No visible damage
Wire Terminals Strength Bend the wire terminal at its root to 90 degree,and then bend it to a opposite direction. No visible damage
Vibration Frequency: 50Hz
Swing: 1.5mm with
Directions: parallel to ceramic substrate normal to ceramic substrate. Duration:2h
No visible damage

How to Order
PGM5516P
12
1 Part Number
2 Package : P (Bulk)

Page: 1 / 2 / 3 / 4