Resistors - Commercial
Download Entire Commercial Resistor Catalogue PDF file (812KB).
Includes from single chip SMD, to more complex arrays and networks.
Fixed linear technologies include fusible, anti-surge power, wirewound, metal film, metal oxide, carbon film, non-inductive wirewound, cement type, and thick film type.
Token also extends a complete line for both military and commercial applications.
|
Fusible Resistors - FRN Series
Metal Film Fusible Resistors are designed to act as an ordinary resistor under normal circuit conditions, and as a fuse under fault conditions.
Type: DIP. Wattage: 1/4W ~ 3W.
FRN Series - PDF (330KB)
|
|
Fusible Resistors - FKN Series
FKN Wirewound Fusible Resistors are designed to act as an ordinary resistor under normal circuit conditions, and as a fuse under fault conditions.
Type: DIP. Wattage: 1W ~ 6W.
FKN Series - PDF (330KB)
|
Fusible Resistors - FSQ Series
FSQ Fusible Cement Resistors are designed to act as an ordinary resistor under normal circuit conditions, and as a fuse under fault conditions.
Type: DIP. Wattage: 2W ~ 10W.
FSQ Series - PDF (330KB)
|
Resistor with Thermal Cut-offs - FKU, FRU Series
FKU, FRU Series Cement Resistor with Thermal Cut-offs is specially sharp fusing characteristics, low cost and easy handling for one box type, space saving type, excellent anti-surge characteristics.
Type: DIP. Wattage: 0.8W ~ 3.5W.
FKU, FRU Series - PDF (107KB)
|
Wirewound Resistors - BWW Series
High precision axial moulded wirewound resistors - BWW Series, high reliability, excellent load life stability. Meets the Standards of MIL-R-93.
Type: DIP. Wattage: 1/2W ~ 10W.
BWW Series - PDF (294KB)
|
Wirewound Resistors - KNP-R Series 
Precision power wirewound resistors (KNP-R) meeting MIL-R-26E (U and V characteristics) and surface temperature (hot spot) 375°C max. Resistor with a wide range of 0.01Ω ~ 82kΩ, covering applications from precision to power.
Type: DIP. Wattage: 0.4W ~ 13W.
KNP-R Series - PDF (313KB)
|
Wirewound Resistors - KNP-VE Series
Vitreous enamel coated wirewound resistors - KNP-VE Series, The element assembly is then protected by a coating or enclosure of vitreous enamel.
Type: DIP. Wattage: 2.5W ~ 12W.
KNP-VE Series - PDF (297KB)
|
Wirewound Resistors - KNP Series
KNP is wirewound resistor and typically used where large power dissipation is required and where AC performance is relatively unimportant.
Type: DIP. Wattage: 1/2W ~ 12.5W.
KNP Series - PDF (319KB)
|
Wirewound Resistors - KNPN Series
KNPN Non-Inductive Wirewound Resistors are typically used where large power dissipation is required and where AC performance is relatively unimportant.
Type: DIP. Wattage: 1/2W ~ 6W.
KNPN Series - PDF (319KB)
|
CDS Photo Resistors - PGM Series
CDS Photo resistor PGM Series are thin film devices which resistance changes with change of the light source.
Type: DIP. Wattage: 90mW ~ 500mW.
PGM Series - PDF (400KB)
|
Carbon Film Resistors - CF Series
CF Series are the earliest and a still popular type made by breaking down hydrocarbon gases at high temperature in a vacuum to form a carbonic deposit on the surface of a cylindrical substrate.
Type: DIP. Wattage: 1/8W ~ 3W.
CF Series - PDF (289KB)
|
Anti-Surge Resistors - RCR Series
RCR Anti Surge Power Resistors are made by metal glaze coating on the surface of a cylindrical substrate with excellent characteristics and stable at even high resistance range.
Type: DIP. Wattage: 1/2W ~ 1W.
RCR Series - PDF (334KB)
|
Composition Resistors - CCR Series
Carbon Composition Resistors are excellent characteristic against high voltage surge current. Higher reliability for disconnection failure comparing to wirewound resistors and film resistors.
Type: DIP. Wattage: 1/2W ~ 1/4W.
CCR Series - PDF (329KB)
|
Precision Resistors Metal Film - MF Series
Precision Resistors include axial through-hole and metal film fusible for special purpose.
Type: DIP. Wattage: 1/8W ~ 3W.
MF Series - PDF (334KB)
|
Metal Oxide Resistors - RSS, RSN Series
MOF Metal Oxide Film Resistors can sustain high temperatures and electrical overloads, and supports moderate-to-precision attributes.
Type: DIP. Wattage: 1/4W ~ 10W.
RSS, RSN Series - PDF (325KB)
|
Zero Ohm and Jumper Wire Resistors - ZO, JW Series
Zero Ohm and Jumper Wire Resistors are developed for the interconnection device Between points on a P.C. Board as jumper wires or Crossovers.
Type: DIP. Wattage: 1/8W ~ 1/4W.
ZO, JW Series - PDF (339KB)
|
Cement Resistors - SQP, SQM, SQT, SQH, SQZ Series
Cement Resistors are made by winding resistance wires around non-alkaline ceramic core or metal oxide film rod, which is added with a layer of heat and humidity resistant and non-corrosive protective material.
Type: DIP. Wattage: 2W ~ 25W.
SQP, SQM, SQT, SQH, SQZ Series - PDF (316KB)
|
|
