| Item |
Specification |
Test Method |
| Temperature Coefficient of Resistance (T.C.R) |
As Spec |
MIL-STD-202F Method 304
+25/-55/+25/+125/+25°C |
| Short Time Overload |
±0.5% |
JIS-C-5202-5.5
RCWV*2.5 or Max Overloading Voltage 5 seconds |
| ΔR±1% for high power rating |
| Insulation Resistance |
>1000MΩ |
MIL-STD-202F Method 302
Apply 100VDC for 1 minute |
| Endurance |
±1% |
70±2°C, Max. working voltage for 1000 hrs with 1.5 hrs
"ON" and 0.5 hrs "OFF" |
| Damp Heat with Load |
±0.5% |
40±2°C,90~95% R.H. Max. working voltage for 1000 hrs
with 1.5 hrs "ON" and 0.5 hrs "OFF"
|
| Dry Heat |
±0.5% |
JIS-C-5202-7.2
at +155°C for 1000 hrs |
| Bending Strength |
As Spec |
JIS-C-5202-6.1.4
Bending Amplitude 3mm for 10seconds |
| Solderability |
95%min coverage |
MIL-STD-202F Method 208H
245°C±5°C, 3 seconds |
| Resistance to Soldering Heat |
±0.5% |
MIL-STD-202F Method 210E
260±5°C, 10 second |
| Dielectric Withstand Voltage |
By Type |
MIL-STD-202F Method 301
Apply Max Overload Voltage for l minute |
| Thermal Shock |
±0.5% |
MIL-STD-202F Method 107G
-55°C~150°C, 100cycles |
| Low Temperature Operation |
±0.5% |
JIS-C-5202-7.1
1hour, -65°C followed by 45minutes of RCWV |
