| Test Item |
Specification |
Test Method |
| Short Time Overload |
±0.5% |
JIS-C-5202-5.5
RCWV*2.5 or Max Overloading Voltage, 5 seconds |
| Thermal Shock |
±0.5% |
MIL-STD-202F Method 107G
-55°C~150°C, 100 cycles |
| Temperature Coefficient of Resistance |
As Spec. |
MIL-STD-202F Method 304
+25/-55/+25/+125/+25°C |
| Load Life |
±1% |
MIL-STD-202F Method 108A
RCWV, 70°C, 1.5 hours ON, 0.5 hours OFF,
total 1000~1048 hours |
Humidity
(Steady State) |
±0.5% |
MIL-STD-202F Method 103B
40°C, 90~95%RH, RCWV 1.5 hours ON,
0.5 hours OFF, total 1000~1048 hours |
| Resistance to Dry Heat |
±0.5% |
JIS-C-5202-7.2
96 hours @ +155°C without load |
| Low Temperature Operation |
±0.5% |
JIS-C-5202-7.1
1hour,-65°C followed by 45 minutes of RCWV |
| Bending Strength |
As Spec. |
JIS-C-5202-6.1.4
Bending Amplitude 3mm for 10 seconds |
Resistance to
Soldering Heat |
±0.5% |
MIL-STD-202F Method 210E
260±5°C, 10±1seconds |
| Solderability |
95% min coverage |
MIL-STD-202F Method 208H
245°C±5°C, 3±0.5(sec) |
| Dielectric Withstand Voltage |
As Spec. |
MIL-STD-202F Method 301
Apply Max Overload Voltage for l minute |
| Insulation Resistance |
>1000MΩ |
MIL-STD-202F Method 302
Apply 100VDC for 1minute |
